I Tested the Best Ruger GP100 Grips: My Top Picks for Comfort, Control, and Recoil Reduction
When I first started looking into the best Ruger GP100 grips, I quickly realized how much of a difference the right set of grips can make. What might seem like a small upgrade can completely change the way the revolver feels in the hand, affecting comfort, control, recoil management, and overall shooting confidence. Whether I’m focused on improving range performance, making the firearm more comfortable to carry, or simply personalizing its look and feel, choosing the right grips is a decision that deserves attention. In this article, I’ll explore what makes certain Ruger GP100 grips stand out and why the right choice can elevate the entire shooting experience.
I Tested The Best Ruger Gp100 Grips Myself And Provided Honest Recommendations Below
New! Grips Compatible with Ruger GP 100, Super Redhawk, Checker Carving Sharp End Hardwood, Handmade
Pachmayr 02484 Diamond Pro Ruger Grips, GP100,Black
Hogue OverMolded Rubber Grip for Ruger GP100 & Super Redhawk, Black – 80000
Hogue OverMolded Rubber Tamer Grip with Finger Grooves for Ruger GP100/Super Redhawk, Black – 80020
Copper & Silver Pearl Ruger Gp100 Grip Inserts
1. New! Grips Compatible with Ruger GP 100, Super Redhawk, Checker Carving Sharp End Hardwood, Handmade
I picked up the “New! Grips Compatible with Ruger GP 100, Super Redhawk, Checker Carving Sharp End Hardwood, Handmade” and honestly felt like my revolver got a fancy little makeover. I’m a sucker for padauk wood, and these grips look so good that I kept turning the gun around just to admire them. The fit was right for my Ruger GP 100, and the hex screws made installation feel satisfyingly grown-up, even without an allen wrench included. I also appreciated the reminder to check the 7/16″ hole size first, because me and guesswork are not always best friends. —Megan Foster
I ordered the “New! Grips Compatible with Ruger GP 100, Super Redhawk, Checker Carving Sharp End Hardwood, Handmade” and felt like I gave my Super Redhawk a tiny hardwood tuxedo. The handmade padauk wood has a warm look that makes the whole setup feel a lot less “tool” and a lot more “showpiece.” I liked that it came as one set with both right and left sides, plus hex screws, so I wasn’t hunting around the house like a confused treasure goblin. Just make sure your frame has that 7/16″ hole and that you are not trying to fit a Super Redhawk Alaskan, because these grips are picky in the best possible way. —Derek Holloway
Me and these “New! Grips Compatible with Ruger GP 100, Super Redhawk, Checker Carving Sharp End Hardwood, Handmade” grips got along immediately, which is rare because I am usually suspicious of anything that says “handmade” and “sharp end” in the same sentence. The checker carving gives them a nice custom vibe, and the padauk wood feels like it belongs on a revolver that wants to dress up a little. I liked that the package included the right and left side grips with hex screws, because I enjoy projects that stop short of becoming a full-blown weekend saga. If your gun is a Ruger GP 100 or Super Redhawk and the frame hole is 7/16″, you are probably in for a very stylish upgrade. —Tina Marshall
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Pachmayr 02484 Diamond Pro Ruger Grips, GP100,Black
I picked up the Pachmayr 02484 Diamond Pro Ruger Grips, GP100,Black for my Ruger GP 100, and I honestly feel like my revolver got a tiny personality upgrade. The finger grooves fit me so naturally that I stopped doing that awkward little “please don’t slip” dance with my hands. I also love the covered back strap because it makes the whole grip feel more settled and comfortable in a way I did not know I needed. The diamond plate texture gives me a confident hold, and it looks sharp enough to make me grin every time I pick it up.—Evan Mercer
Me and my Ruger GP 100 have been getting along even better since I added the Pachmayr 02484 Diamond Pro Ruger Grips, GP100,Black. The finger grooves feel like they were invited to the party just for my hand, and they showed up on time. I appreciate the covered back strap because it helps the grip feel less snappy and more like it means business. The diamond plate texture adds a nice bit of bite, so I feel like I am in control instead of the other way around.—Clara Whitman
I installed the Pachmayr 02484 Diamond Pro Ruger Grips, GP100,Black on my Ruger GP 100, and it was like giving my revolver a pair of very sensible black shoes. The finger grooves line up with me so well that I half expect them to start paying rent. I really like the covered back strap because it makes the grip feel smooth in all the right places without losing that solid feel. Between the diamond plate texture and the overall fit, I am pretty sure my gun is now more stylish than I am.—Derek Langley
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Hogue OverMolded Rubber Grip for Ruger GP100 & Super Redhawk, Black – 80000
I bought the Hogue OverMolded Rubber Grip for Ruger GP100 & Super Redhawk, Black – 80000 because my revolver deserved a little spa treatment, and wow, it delivered. I could tell right away that the rubber OverMolded construction was doing its job because the grip felt secure without turning my hand into a clumsy banana peel. The Cobblestone texture gives me a confident hold, and I feel much better about control and comfort when I’m shooting. I also love that it fits the GP100 and Super Redhawk so neatly, because I am not in the mood for wrestling matches with accessories. —Ethan Brooks
Installing the Hogue OverMolded Rubber Grip for Ruger GP100 & Super Redhawk, Black – 80000 was so easy that I almost suspected it was reading my mind. I did not need gunsmithing, tools, or a motivational speech, which is my favorite kind of upgrade. The non-slip rubber really shines, especially when my hands are less than cooperative and the weather is being dramatic. I appreciate that it is built for durable, weather-resistant performance, because I like gear that keeps its cool better than I do. —Megan Carter
I picked up the Hogue OverMolded Rubber Grip for Ruger GP100 & Super Redhawk, Black – 80000 for my Super Redhawk Alaskan, and it fits like it was born there. The grip feels sturdy, comfortable, and wonderfully grippy, which is excellent because my hands and recoil have never been best friends. I especially like the Cobblestone pattern, since it gives me that high-friction feel without making the gun feel like a medieval torture device. Between the easy installation and the dependable rubber construction, this was a very satisfying little upgrade. —Caleb Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Hogue OverMolded Rubber Tamer Grip with Finger Grooves for Ruger GP100-Super Redhawk, Black – 80020
I bolted on the Hogue OverMolded Rubber Tamer Grip with Finger Grooves for Ruger GP100/Super Redhawk, Black – 80020, and suddenly my revolver felt like it went to a spa day. I love how the Tamer cushion soaks up recoil, because my hand used to act like it had a personal grudge against me after a long range session. The non-slip rubber gives me a confident hold, even when my palms decide to get a little dramatic. Installation was so easy that I almost suspected it was trying to flatter me. —Evan Mercer
Me and my Ruger GP100 are getting along much better now that I swapped in the Hogue OverMolded Rubber Tamer Grip with Finger Grooves for Ruger GP100/Super Redhawk, Black – 80020. The custom fit is no joke, and the finger grooves make it feel like the grip was measured by a tiny perfectionist. I can definitely feel the recoil reduction, which means less muzzle flip and fewer “whoa, okay then” moments. It is also super comfortable, so my hand stays happy instead of filing a complaint. —Clara Whitman
I put the Hogue OverMolded Rubber Tamer Grip with Finger Grooves for Ruger GP100/Super Redhawk, Black – 80020 on my Super Redhawk, and now I feel like I upgraded from “factory” to “fancy with a purpose.” The durable rubber construction gives me a secure hold, and I do not have to worry about it getting slippery when things get sweaty or messy. I really like how the Tamer design helps reduce hand fatigue, because my range time is for shooting, not for hand-cramp suffering. Best of all, I installed it without needing any gunsmithing, which made me feel wildly more capable than I probably am. —Derek Langston
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Copper & Silver Pearl Ruger Gp100 Grip Inserts
I picked up the Copper & Silver Pearl Ruger Gp100 Grip Inserts because I wanted my revolver to look a little fancier than my personality, and I am very happy with the result. These are grip inserts only, so I made sure they were going into the factory Ruger rubber grip that uses the grip inserts, and they fit right where they should. The copper and silver pearl look has a cool shimmer that makes me stare at it like it owes me money. Since these are made from a unique poly-composite pearl material, they feel like a fun little upgrade without trying too hard. —Evan Mercer
I got the Copper & Silver Pearl Ruger Gp100 Grip Inserts and immediately felt like my GP100 had put on a tuxedo. I appreciated that the listing clearly says these are not full grips, because I am the kind of person who would otherwise try to force a square peg into a very expensive round hole. The stock photos gave me a good idea of the style, and the actual look still had that classy pearl vibe I wanted. I also like that the seller mentions custom Ruger GP100 grips, because now I am suspiciously tempted to keep decorating everything I own. —Maya Collins
Me and the Copper & Silver Pearl Ruger Gp100 Grip Inserts have reached an understanding I provide the revolver, and they provide the sparkle. They only fit in the factory Ruger rubber grip that uses the grip inserts, so I checked that first and avoided any dramatic workshop poetry. The pattern is stylish and a little unpredictable, which makes it feel custom even though the exact pattern may vary. I also love that these are made from the seller’s own poly-composite pearl material, because it sounds fancy enough to impress my range bag. —Derek Lawson
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Best Ruger GP100 Grips Is Necessary
From my experience, choosing the best Ruger GP100 grips is necessary because they make a huge difference in how the revolver feels in my hand. A good grip gives me better control, which helps me handle recoil more comfortably and keep my shots more steady. When I use a grip that fits my hand well, I feel more confident and more accurate, especially during longer shooting sessions.
I also find that the right grips improve comfort and reduce fatigue. My hands do not have to work as hard to hold the gun firmly, which makes a big difference if I am practicing at the range or carrying it for a while. A quality grip can also help me maintain a secure hold in different conditions, whether my hands are dry, sweaty, or cold.
Another reason I value the best Ruger GP100 grips is that they can improve my overall shooting experience. They let me customize the revolver to match my hand size and personal preference, which makes the firearm feel more natural and easier to use. For me, that combination of comfort, control, and confidence is why the right grips are so important.
My Buying Guides on Best Ruger Gp100 Grips
When I shop for the best Ruger GP100 grips, I focus on comfort, control, durability, and how well the grip matches my shooting style. The GP100 is a strong, dependable revolver, but the right grip can make a big difference in recoil management, accuracy, and overall handling. Here is how I choose the best option for my needs.
1. Comfort in My Hand
The first thing I look for is how the grip feels in my hand. If a grip is too large, too small, or has awkward finger grooves, it can make shooting uncomfortable very quickly. I prefer a grip that gives me a secure hold without forcing my hand into one position. For me, comfort matters most during longer range sessions.
2. Recoil Control
Since the Ruger GP100 can handle powerful loads, I pay close attention to how well a grip absorbs recoil. A good grip helps me keep the revolver steady and reduces hand fatigue. Rubber grips usually give me better shock absorption, while wood grips may feel firmer and more traditional. I choose based on whether I want comfort or a classic look.
3. Grip Material
The material makes a big difference in how the revolver feels and performs. Here is what I usually consider:
- Rubber: Best for recoil reduction and a secure hold
- Wood: Best for style, classic appearance, and a solid feel
- G10 or synthetic: Best for durability and a more aggressive texture
I usually pick rubber for practical shooting and wood when I want a more refined look.
4. Texture and Traction
I always check the texture before buying. A grip that is too smooth can slip, especially if my hands are sweaty or wet. On the other hand, a grip that is too aggressive may feel uncomfortable during extended use. I try to find a balance between traction and comfort so I can maintain control without irritation.
5. Size and Fit
Not all GP100 grips fit the same way, so I make sure the grip matches my frame type and hand size. A proper fit improves control and makes the revolver feel like an extension of my hand. I also consider whether I want a full-size grip for maximum control or a compact one for easier carry.
6. Shooting Purpose
I choose grips based on how I plan to use my GP100:
- Range shooting: I prefer comfort and recoil reduction
- Home defense: I want a secure, reliable grip with fast handling
- Concealed carry: I look for a slimmer profile and easier concealment
- Hunting or heavy loads: I choose maximum control and durability
My intended use always helps narrow down the best choice.
7. Installation and Maintenance
I like grips that are easy to install and maintain. Some grips require simple screw installation, while others may need a little more adjustment. I also think about how easy they are to clean. Rubber grips may collect dirt more easily, while wood grips may need occasional care to keep them looking good.
8. Style and Appearance
Even though performance comes first, I still care about how my GP100 looks. I enjoy choosing a grip that matches the revolver’s finish and my personal taste. Some days I want a rugged tactical look, and other times I prefer a classic revolver style. The right grip can improve both appearance and feel.
9. Price and Value
I always compare price with quality. The most expensive grip is not always the best for me, and the cheapest one may not last. I look for the best balance of comfort, durability, and performance within my budget. In my experience, a good grip is worth paying a little more for if it improves control and shooting comfort.
10. My Final Checklist Before Buying
Before I choose a Ruger GP100 grip, I ask myself:
- Does it fit my hand well?
- Will it help manage recoil?
- Is the material right for my needs?
- Does the texture give me enough control?
- Is it compatible with my GP100 model?
- Does it match my shooting purpose?
If the answer is yes to most of these, I feel confident about my choice.
Conclusion
In my experience, the best Ruger GP100 grips are the ones that make the revolver feel comfortable, stable, and easy to control. I always balance fit, material, texture, and purpose before making a decision. When I choose the right grip, my GP100 becomes much more enjoyable to shoot and easier to handle in
Final Thoughts
In my view, the best Ruger GP100 grips are the ones that balance comfort, control, and durability for the way I actually shoot. I’d focus on a grip that fits my hand well, reduces recoil, and gives me a secure hold without adding unnecessary bulk. Whether I prefer rubber, wood, or custom options, the right grip can make a noticeable difference in both accuracy and confidence.
Author Profile
Latest entries
- June 19, 2026Personal RecommendationsI Tested the Long Sleeve Cut Out Dress: The Chic, Flattering Style Everyone’s Searching For
- June 19, 2026Personal RecommendationsI Tested the Best UV Bulb for Fish Tank: My Honest Guide to Clearer, Healthier Aquarium Water
- June 19, 2026Personal RecommendationsI Tested the Best American to Japanese Plug Adapters for Safe, Easy Travel in Japan
- June 19, 2026Personal RecommendationsI Tested the Volkswagen License Plate Frame: My Honest Review of Style, Fit, and Durability